626 L4-2.0L DSL (1984)
Timing Belt Tensioner: Technical Service Bulletins
Timing Belt & Pulley - Modification
Category 1
Applicable Model/s 1984 626
Subject TIMING BELT & PULLEY
Bulletin No. 003/84
Issued
5/30/84
Revised
8/10/84
CAMSHAFT AND TIMING BELT PULLEY
DESCRIPTION
The following modifications have been made since the production of April 1, 1984:
1.
The tooth configuration of the timing belt has been changed and the timing belt pulley, camshaft pulley, and water pump pulley have been
changed to fit the belt.*
2.
The tensioner spring force has been increased from 4 kg to 8 kg.
3.
The timing mark on the camshaft pulley has been changed from "C" to "CX".
Note:
If the old belt is replaced by the new belt, the new timing belt pulley and camshaft pulley must be installed together with the new spring
tensioner.
VIN OF PRODUCTION CHANGE
Sedan:
JM1GC221 E1635512 April 1, 1984
Hatchback:
JM1GC241 E1609645 April 1, 1984
Coupe:
JM1GC311 E1617637 April 1, 1984
PARTS INFORMATION
PART NUMBER
NEW
OLD
DESCRIPTION
QTY
INTERCHANGEABILITY
F808 11 321
F801 11 321B
Timing Belt Pulley
1
NEW + P to OLD
FE79 12 205
FE01 12 205
Timing Belt
1
NEW + P to OLD
FE02 12 205
FE79 12 425A
F801 12 425A
Camshaft Pulley
1
NEW + P to OLD
FE79 12 711
FE01 12 711A
Tensioner Spring
1
NEW + P to OLD