626 L4-2000 1998cc (1983)
Rocker Arm Assembly: Technical Service Bulletins
Rocker Arm Shaft - Installation
Category 1
Applicable Model/s 1983-84 626
Subject ROCKER ARM SHAFT INSTALLATION
Bulletin No. 006/84
Issued
8/10/84
Revised
OIL HOLES LOCATION
DESCRIPTION
It is imperative that the oil holes in the rocker arm shafts (both intake and exhaust) align with the oil holes in the center camshaft cap when installed.
INSTALLATION
Be sure both rocker arm shaft oil holes (in the center camshaft cap) face each other.
