626 L4-2184cc 2.2L SOHC Turbo F2 (1988)
REPAIR PROCEDURE
1.
Install the harness between the blue 8 wire connector and the blue 1 wire connector at the location shown on page 1.
2.
After installation, turn the ignition switch to the "ON" position. Remove the connectors to the water temperature switch No. 1 and No. 2.
Note that the fan operates on low speed.
3.
Ground the connector to the No. 2 switch (round connector) and verify that the fan operates on high speed. Reconnect the connectors.
WARRANTY INFORMATION
Comment Code:
7G
Damage Code:
40
Process No:
B7039A
Part No. of Main Cause:
GJ25 61 54XA
Operation No:
XX0175RX
Labor Hour:
0.2 Hr.
