626 L4-2184cc 2.2L SOHC Turbo F2 (1988)
Fluid Line/Hose: Customer Interest
A/T - ATF Leakage from Cooler Line
Category
Applicable Model/s
7
1988 626/MX-6
ECAT
Subject
Bulletin No.
060/89
ATF LEAKAGE FROM COOLER LINE
Issued
5/24/89
Revised
DESCRIPTION
The following modifications have been made to 1988 626/MX-6 ECAT in order to prevent ATF from leaking from the cooler line.
MODIFICATION A
The "U"-shaped oil hose and connector pipe at the thermo switch box have been replaced with an oil line as shown.
If you observe any leakage from this part, replace the oil pipe with the modified one according to the repair procedure in this bulletin.
MODIFICATION B
To provide more clamping force, the length of the bolts at the hose clamps on the cooler line has been increased. If you encounter a complaint of oil
leakage at the oil hose, install a new hose with modified clamps.
VIN OF PRODUCTION CHANGE
Modification A.
1988 626/MX-6 vehicles manufactured in Japan
JM1GD****K1703425
July 11, 1988
1988 MX-6 vehicles manufactured in the U.S.A.
1YVGD****K5200001
August 1, 1988
Modification B.
1988 626/MX-6 vehicles manufactured in Japan
JM1GD****J1537054
October 6, 1987
1988 MX-6 vehicles manufactured in the U.S.A.
1YVGD****J5104074
December 18, 1987