626 V6-2496cc 2.5L DOHC (1995)
2. Install the left timing belt cover.
Tightening torque: 7.9-10.7 N.m (80-110 kgf.cm, 70-95.4 in.lbf)
3. Install the crankshaft position sensor connector bracket on the left timing belt cover.
Tightening torque: 7.9-10.7 N.m (80-110 kgf.cm, 70-95.4 in.lbf)
4. Install the harness bracket on the right timing belt cover.
Tightening torque: 7.9-10.7 N.m (80-110 kgf.cm, 70-95.4 in.lbf)
5. Install the No.3 engine mount.
Tightening torque:
Bolt (A): 75-104 N.m (7.6-10.7 kgf.m, 55-77.3 ft.lbf)
Bolt (B): 86-116 N.m (8.7-11.9 kgf.m, 63-86.0 ft.lbf)
