626 V6-2496cc 2.5L DOHC (1995)
Headlamp Switch: Technical Service Bulletins
Headlight Switch - Replacement
Bulletin No.: 005/96
Issued: 04/18/96
Revised:
Category
T
Applicable Model/s
1993-96 626 / MX-6
Subject
HEADLIGHT SWITCH REPLACEMENT
APPLICABLE MODELS/VINS
All 1993 - 1995 626 and MX-6.
1996 626 and MX-6 with a VIN of 1YVGE****T5523761 and lower.
DESCRIPTION
If the headlight switch on any of the above vehicles requires replacement, DO NOT REPLACE THE ENTIRE COMBINATION SWITCH. The
headlight switch is available as a service part (see Parts Information). Replace the switch using the instructions.
NOTE:
Service Managers should file a copy of this bulletin in section T of the applicable workshop manual.
REPAIR PROCEDURE
WARNING:
THIS PROCEDURE REQUIRES AIR BAG MODULE REMOVAL. FOLLOW ALL "SERVICE WARNINGS" DESCRIBED IN SECTION "S"
OF THE WORKSHOP MANUAL WHEN HANDLING AIR BAG MODULES.
NOTE:
BETM section Z4 is required for headlight switch removal / installation.
1.
Refer to the BETM and remove the following:
^
Air Bag
^
Steering Wheel
^
Column Cover
^
Clock Spring
^
Combination Switch