626 ES V6-2.5L DOHC (1997)
Air Door Actuator / Motor: Testing and Inspection
Air Mix Actuator
Air Mix Actuator
1. Remove the air mix actuator installation screws and air mix actuator.
2. Leave the vehicle harness connected.
3. Turn the ignition switch to ON.
4. Cycle the air mix lever from HOT or COLD.
5. Verify that the actuator operates as shown.
Ohmmeter Connection
Reference
1. Disconnect the air mix actuator connector.
2. Connect battery positive voltage to terminals G and H of the air mix actuator and check the actuator operation.
3. If not as specified, replace the air mix actuator.
Reference
Reference
4. If correct, compare the measurement resistance to the characteristics shown in the figure.
5. If not as specified, replace the air mix actuator.