mazda Workshop Repair Guides

Mazda Workshop Service and Repair Manuals

Manual Antenna|Page 3609 > < Antenna Mast|Testing and Inspection
Page 1
background image

Antenna Mast: Service and Repair
Manual Antenna

MANUAL ANTENNA REMOVAL/INSTALLATION

CAUTION:  When installing the manual antenna, not tightening the mounting nut fully could cause poor radio reception. When installing the manual
antenna, securely tighten the mounting nut according to the specified torque value.

1. Disconnect the negative battery cable.
2. Turn over the trunk compartment covering from passenger's side.
3. Remove in the order indicated in the table.
4. Install in the reverse order of removal.

Mounting Nut Removal Note

Use snap-ring pliers to remove the mounting nut.

Manual Antenna|Page 3609 > < Antenna Mast|Testing and Inspection