626 LX L4-2.0L DOHC (1999)
7. Turn the crankshaft clockwise twice, and verify that all timing marks are aligned. If not aligned, repeat from Step 1.
Cylinder Head Cover Installation Note
1. Verify that the grooves on the cylinder head cover are free of oil, water and other foreign material.
2. Install the cylinder head cover gasket into the cylinder head cover.
3. Apply silicone sealant to the cylinder head as shown.
4. Tighten the cylinder head cover bolts in two or three steps in the order shown.
Crankshaft Pulley Installation Note
-
Hold the crankshaft by using the Special Service Tool (SST)