626 LX L4-2.0L DOHC (1999)
![background image](/mazda/626_lx/l4-2.0l_dohc/Page-1259025.png)
5.
Spray the entire contents of the bottle in short bursts, 3 seconds ON, 3 seconds OFF into the rotating fan. A fine mist may exit from the ducts.
6.
When the bottle is empty, stop the engine and remove the applicator.
NOTE:
Clean the empty bottle by flushing it with clean water.
7.
Use STEP 1 to dry and cure the product.
8.
While the product is drying, re-install the glove box.
9.
Note application date in service record