626 LX L4-2.0L DOHC (1999)
Fuel Pressure Regulator: Initial Inspection and Diagnostic Overview
Fuel Hose Installation
WARNING: Fuel line spills and leaks are dangerous. Fuel can ignite and cause serious injuries or death and damage. When installing the fuel
hose, observe "Fuel Hose Installation" and "Fuel Leakage Inspection" described below.
FUEL HOSE INSTALLATION
1. Replace damaged or deformed fuel hose, fuel pipe and hose clamps.
2. When installing the fuel hose onto the fuel pipe, fit the hose onto the pipe over 25 mm (1.00 in). When the pipe has a stopper, fit the hose until it
contacts the stopper.
3. Install a hose clamp over the fuel hose within the clamp installation range as shown, avoiding the original clamp position.
4. When installing two clamps, their tabs must be positioned more than 45° (desired 180°) apart.
Fuel Leakage Inspection
WARNING: Fuel line spills and leaks are dangerous. Fuel can ignite and cause serious injuries or death and damage. Always carry out the
following procedure with the engine stopped.
1. Disconnect the negative battery cable.