626 LX L4-2.0L DOHC (1999)
Valve Clearance: Testing and Inspection
VALVE CLEARANCE INSPECTION [FS]
1. Remove the cylinder head cover.
2. Verify that the engine is in cold condition.
3. Measure the valve clearance.
(1) Turn the crankshaft clockwise so that the No.1 piston is at TDC of the compression stroke.
(2) Measure the valve clearance at A in the image.
Standard [Engine cold]: 0.225 - 0.295 mm (0.0089 - 4.0116 inch)
-
If the valve clearance exceeds the standard, replace the adjustment shim. See: Adjustments
(3) Turn the crankshaft 360° clockwise so that the No.4 piston is at TDC of the compression stroke.
(4) Measure the valve clearance at B in the image.
-
If the valve clearance exceeds the standard, replace the adjustment shim.
4. Install the cylinder head cover. Refer to Timing Belt; Service and Repair.