626 LX L4-2.0L DOHC (1999)
1. Remove the driver-side air bag module. (Refer to DRIVER-SIDE AIR BAG MODULE REMOVAL/INSTALLATION.)
2. Install the two bolts to the driver-side air bag module.
WARNING: If the air bag module is not properly installed to the tire wheel, serious Injury may occur when the module Is deployed.
When Installing the air bag module to the tire wheel, make sure the module is facing up.
3. Tie the air bag module to the tire wheel with the front of the module facing up. Wrap the wire through the wheel and around the air bag module
bolt at least four times.
4. Connect the SST (Deployment Tool) to the driver-side air bag module as shown.
5. Stack three tires on top of the tire with the attached air bag module. Make sure the tire on top of the stack has a wheel.