626 LX L4-2.0L DOHC (1999)
Power Steering Pump: Testing and Inspection
FLUID PRESSURE INSPECTION
1. Set the SSTs as shown in the figure.
2. Disconnect the pressure pipe from the oil pump, and connect the SSTs.
3. Bleed the air from the system.
4. Open the gauge valve fully. Start the engine and turn the steering wheel fully left and right to raise the fluid temperature to 50 - 60°C {122 - 140°
F}.
CAUTION: If the valve is left closed for more than 5 seconds, the fluid temperature will Increase excessively and adversely affect the oil pump.
5. Close the gauge valve completely. Increase the engine speed to 1,000 - 1,500 rpm and measure the fluid pressure generated by the oil pump.
