626 LX L4-2.0L DOHC (1999)
SOLENOID FEED/FINAL DRIVE GEAR LUBE CIRCUIT
Fluid under LID circuit pressure flows to the solenoid regulator valve, where it enters the SF circuit at a lower, regulated pressure. The flow of fluid in
the SF circuit has the following paths:
-
To Shift Solenoid 1 (SS1)
-
To Shift Solenoid 2 (SS2)
-
To 3-2 Timing/Coasting Clutch Solenoid (3-2 T/CCS)
-
To Torque Converter Clutch (TCC) solenoid
-
To the final drive gear lube circuit
The flow of fluid in the SF circuit also provides lubrication to the final drive components.