mazda Workshop Repair Guides

Mazda Workshop Service and Repair Manuals

EGI Control Unit - Remanufactured Exchange Program|Page 2123 > < Body Control Module|Locations
Page 1
background image

Engine Control Module: All Technical Service Bulletins
EGI Control Unit - Remanufactured Exchange Program

Bulletin No.
010/91

Issued
4/2/91

Revised

Category 
F

Applicable Model/s 
(see below)

Subject 
REMANUFACTURED EGI CONTROL UNIT PROGRAM

DESCRIPTION

Remanufactured EGI control units for 1990 and 1991 year models have become available through the existing exchange program. The following Parts
Information section shows the available remanufactured EGI control units for the following models: '86-'91 323/Protege, '86-'90 626/MX-6, '88-'91 929,
'89-'91 MPV (except 2.6L), '90-'91 MX-5 and '84-'91 RX-7.

NOTE:

^

New EGI control units are no longer available as the remanufactured units supersede the new units.

^

See Parts Bulletin II/48E or E-9-89 for the core return procedure.

^

The removed bracket from the vehicle should be used when installing the remanufactured unit. Do NOT return the bracket with the removed 
control unit.

^

Return the removed control unit WITHIN 7 DAYS to insure continued availability of cores.

This bulletin supersedes the information contained in S/B Category F, no. 008/90.

PARTS INFORMATION

323/Protege Models

EGI Control Unit - Remanufactured Exchange Program|Page 2123 > < Body Control Module|Locations