B2300 L4-2.3L (2008)
NOTE: LH side shown, RH side similar.
3. Remove the front tender-to-grille opening panel reinforcement bolts.
-
To install, tighten to 12 N-m (1.2 kgf-m, 9 ft-lbf).
4. Remove the air deflector.
1. Remove the 2 push-pins
2. Remove the air deflector.
5. Remove the auxiliary power steering cooler-to-radiator grille opening panel reinforcement bolt.
-
To install, tighten to 12 N-m (1.2 kgf-m, 9 ft-lbf).
6. Remove the horn.
1. Remove the bolt.
2. Disconnect the electrical connector.
3. Remove the horn.
