B2300 L4-2.3L (2008)
Vehicles with 4.0L engine
16. If equipped, remove the wheel splash guard.
CAUTION:
-
Remove the electrical connector locators from the splash shield prior to removal.
-
On the RH splash shield, disconnect the vacuum lines from the vacuum storage reservoir.
17. Remove the splash shield.
1. Remove the screws.
2. Remove the pushpin.
3. Remove the bolts.
4. Remove the splash shield.
All vehicles
18. Remove the nuts and the evaporator core housing.
19. To install, reverse the removal procedure.
-
Lubricate the refrigerant system with the correct amount of clean refrigerant oil. See A/C REFRIGERANT OIL ADDITION.
-
Install new O-ring seals lubricated in clean refrigerant oil.
-
Lubricate the coolant hoses with coolant hose lubricant or plain water only, if needed.
20. Evacuate, leak test, and charge the refrigerant system. See A/C REFRIGERANT SYSTEM TESTS.