B2300 L4-2.3L (2008)
Fluid - M/T: Testing and Inspection
MANUAL TRANSMISSION OIL INSPECTION
Note:
^
Park the vehicle on level ground.
1. Remove the oil level plug and washer.
2. Verify that the fluid is just below the fill plug hole.
3. If the oil level is low, add the specified amount and type of oil through the oil level plug hole.
Specified oil grade:
MERCON or M-III
4. Install a new washer and the oil level plug.
Tightening torque
48 Nm (4.9 kgf-m, 35 ft-lbf)