B2300 L4-2.3L VIN D (2004)
![background image](/mazda/b2300/l4-2.3l_vin_d/Page-78001.png)
Horn Switch: Service and Repair
HORN SWITCH REMOVAL / INSTALLATION
1. Remove the driver-side air bag module.
2. Disconnect the horn wire from the switches (1).
3. Remove the horn switch screws and remove the switches (2).
4. Install in the reverse order of removal.
Tightening torque: 6.5 - 7.5 N.m {66 - 76 kgf.cm, 58 - 66 in.lbf}
5. Prove out the air bag system. See AIR BAG SYSTEM ON-BOARD DIAGNOSIS.