B2300 Regular Cab 2WD L4-2.3L VIN A (1997)
Transmission Cooler: Service and Repair
REMOVAL
Remove in the order shown, referring to the following steps:
1. Raise and support the hood.
2. Remove the oil cooler bolt (upper).
3. Raise the vehicle on a vehicle hoist.
4. Place a suitable container under the oil cooler.
5. Disconnect the oil cooler hoses.
6. Remove the oil cooler bolts.
NOTE: Make sure not to spill the remaining transmission fluid out of the oil cooler when removing the oil cooler from the vehicle.
INSPECTION
Inspect all parts and repair or replace as necessary.
INSTALLATION
Install in the reverse order of removal.