B2300 SE Regular Cab 2WD L4-2.3L VIN A (1997)
^
Variable speed electric drill
^
Safety glasses or goggles
^
Lint free cloth
^
12" length of natural fiber string
NOTE:
Obtain materials locally.
COUPLING CLEANING PROCEDURES
a)
Bend the welding rod to fabricate a cleaning tool. Refer to Fig. 1.
b)
Determine coupler size and select appropriate length of abrasive strip.
c)
Insert strip into cleaning tool. Refer to Fig. 2
d)
Insert tool into drill chuck and secure.
e)
Coat the abrasive strip with the appropriate refrigerant oil.
f)
Roll abrasive strip around cleaning tool. Refer to Fig. 2.
g)
Use the variable speed drill in the low setting and slowly insert the cleaning assembly into the coupling.
^
Clean at moderate speed for approximately one (1) minute or until the surface is clean.
CAUTION: