B2300 SE Regular Cab 2WD L4-2.3L VIN D (2001)
Coolant Line/Hose: Service and Repair
Exhaust Gas Recirculation (EGR) Valve Heater Hose
Hose-Exhaust Gas Recirculation (EGR) Valve Heater Hose
Removal and Installation
1. Drain the cooling system.
2. Disconnect the hose from the degas bottle.
3. Disconnect the electrical connector and the hose from the thermostat housing.
4. Remove the transmission.
5. CAUTION: Remove the electrical connector locators from the splash shield before removing the shield.
Remove the RH inner fender splash shield.
1. Remove the screws.
2. Remove the pushpin.
3. Remove the bolts.
4. Remove the splash shield.