B2300 SE Regular Cab 2WD L4-2.3L VIN D (2001)
Engine Oil Dip Stick - Dip Stick Tube: Service and Repair
Dip Stick Tube
Oil Level Indicator and Tube
Removal and Installation
1. Remove the oil level indicator and the upper retaining bolt.
2. Raise the vehicle on a hoist.
3. Remove the oil level indicator tube.
^
Remove the bolt.
^
Remove the oil level indicator tube.
4. Remove the O-ring from the indicator ring.
5. NOTE: Apply clean engine oil to the O-ring before installation of the indicator tube.
To install, reverse the removal procedure.
