B2500 SE Cab Plus 2WD L4-2.5L VIN C (1999)
Battery Cable: Service and Repair
1. Disconnect both battery cables.
2. Remove the nuts (1).
3. Remove the negative battery cable body ground nut (2) and starter motor ground (3).
4. Remove the bolt (4)
5. Remove the starter motor solenoid terminal cover.
6. Disconnect the starter motor connections.
1. Remove the starter motor ground cable nut (5) and disconnect the starter motor ground cable (6).
2. Remove the solenoid cable nut (7) and disconnect the solenoid cable (8).
3. Remove the starter motor positive cable nut (9) and disconnect the starter motor positive cable (10).
7. Remove the cables.
NOTE: When the battery is disconnected and reconnected, some abnormal drive symptoms may occur while the vehicle relearns its adaptive
strategy. The vehicle may need to be driven 16 km (10 ml) or more to relearn the strategy.
8. Install in reverse order of removal.