B2500 SX Regular Cab 2WD L4-2.5L VIN C (1999)
9. Connect the 42-pin connector and tighten the bolt.
10. Connect the oil pressure sensor switch.
11. Connect the wiring to the fuel injectors.
12. Connect the heated oxygen sensor connectors.
13. Connect the water temperature indicator sender unit and the ECT sensor.
14. Connect the CMP sensor connector.
15. Tighten the bolt.
16. Install the PCM ground strap.
17. Install the nut attaching the engine control sensor wiring to the dash panel.
18. Install the PCM wiring.
19. Install the upper intake manifold.