B2500 SX Regular Cab 2WD L4-2.5L VIN C (1999)
Fog/Driving Lamp Switch: Service and Repair
1. Pull out the center trim finish panel (1).
2. Disconnect the radio connectors (2) from the center trim finish panel (1).
3. Remove the screws (1).
4. Remove the switch bracket (2).
5. Remove the fog lamp switch (3).
6. Install in reverse order of removal.
Tightening torque
2 - 3 N.m (20 - 31 kg.cm, 18 - 26 in.lb)