B3000 V6-3.0L (2007)
Tire Pressure Sensor: Service and Repair
Tire Pressure Monitoring System (TPMS) Sensor
TIRE PRESSURE MONITORING SYSTEM (TPMS) SENSOR
Disassembly Note
Caution:
^
Tire pressure sensors are manufactured in multiple colors based on their application. When installing a new sensor, make sure the color
of the sensor being installed matches the color of the sensor that was removed. The different colored sensors are not interchangeable.
Note:
^
The sensor can be removed and installed without removing the strap or the cradle.
Note:
^
Tire pressure sensors are equipped with lithium-ion batteries and must be disposed of accordingly.
Caution:
^
The sensor, cradle and strap can be damaged by incorrect tire mounting or dismounting. Dismount the tire only as instructed.
1. Remove the tire from the wheel.
Caution:
^
Do not use a large screwdriver. Apply minimum force during removal or damage to the sensor locking clip can occur.
2. Using a pocket screwdriver, or similar tool, remove the sensor locking clip.