B3000 V6-3.0L (2007)
Front Steering Knuckle: Procedures
Spindle Removal
Spindle Removal
1. Raise the vehicle on a hoist.
2. Remove the wheel and tire assembly.
3. Remove the front disc brake rotor shield.
4. Use suitable jack to support the front suspension lower arm.
Caution:
^
Do not allow the shaft to turn while removing the nut. Hold the flats using a suitable wrench or damage to the shock can result.
5. Remove the upper shock absorber nut/washer assembly and bushing.
6. Remove the upper ball joint retaining nut and pinch bolt.
7. Separate the ball joint from the front wheel spindle.