B3000 V6-3.0L (2007)
^
Tighten to 25 N-m (2.5 kgf-m, 18 ft-lbf).
6. Remove the spring compressor.
7. Position the shock absorber and install 2 new shock absorber lower nuts.
^
Tighten to 25 N-m (2.5 kgf-m, 18 ft-lbf).
8. Install a new shock absorber rod nut and washer.
^
Tighten to 48 N-m (4.9 kgf-m, 35 ft-lbf).
9. Position a suitable jack under the front suspension lower arm and raise the suspension until the index marks on the lower arm and the frame are
aligned (curb height).
^
Tighten to 200 N-m (20.4 kgf-m, 148 ft-lbf).
10. Remove the jack from under the lower control arm.