B3000 V6-3.0L OHV (2006)
Cross-Member: Service and Repair
TRANSMISSION SUPPORT CROSSMEMBER
Transmission Support Crossmember
Removal and Installation
1. With the vehicle in NEUTRAL, position it on a hoist.
2. Remove the 2 transmission mount nuts from the transmission support crossmember.
-
To install, tighten to 90 N-m (9.2 kgf-m, 66 ft-lbf).
CAUTION: Do not allow the transmission to hang freely.
3. Support the transmission with a suitable jack.
NOTE: 4WD transmission support crossmember shown, 2WD transmission support crossmember similar.