B3000 2WD V6-3.0L OHV (1994)
Alignment: Technical Service Bulletins
Alignment - Specifications
Bulletin No.: 006/95
Issued: 3/28/95
Revised
Category
N
Applicable Model/s
1994 B-Series
1994 Navajo
Subject
ALIGNMENT SPECIFICATIONS
DESCRIPTION
This bulletin provides information on adjustments, service specification and parts for front end alignment. When the workshop manual diagnostic
procedures indicate that a front end alignment is necessary to resolve a customer complaint, refer to the information in the bulletin for recommended
guidelines.
DETAILED SERVICE PROCEDURE
The chart illustrates optimum alignment selling and recommended allowable ranges for B-series and Navajo vehicles.
NOTE:
These ranges are only recommended guidelines.
NOTE:
All Specifications Are Represented In Degrees VEHICLE PREPARATION AND CONDITION
^
No Driver and/or Passengers
^
No Luggage
^
Gas Tank Full Radiator and Engine Oil To The Specified Levels
^
Spare Tire, Jack And Tools Stored In Designated Areas
^
Tire Pressure Checked And, If Necessary, Adjusted.
^
Tire Sizes Comparable To Original Equipment Suspension Conforms With That Of An Originally Equipped Vehicle
DEFINITIONS
1.
Camber Average - LH camber plus RH camber divided by two (2)