mazda Workshop Repair Guides

Mazda Workshop Manuals

< PREV PAGE NEXT PAGE >
Page 1
background image

Door Sensor/Switch (For Alarm): Service and Repair

1. Remove the front door trim panel. 
2. Position the watershield aside.

3. Remove the door disarm switch.

1. Remove the E-clip.
2. Remove the door lock rod actuator.
3. Disconnect the electrical connector.

NOTE:  The door disarm switch locator mark must be in the down position prior to installation.

4. Install in reverse order of removal.

Sensors and Switches > Sensors and Switches - Accessories and Optional Equipment > Door Sensor/Switch (For Alarm) > Component Information > Service and Repair

< PREV PAGE NEXT PAGE >