B3000 DS Cab Plus 2WD V6-3.0L OHV (2001)
Axle Bearing: Service and Repair
AXLE TUBE BEARING REMOVAL / INSTALLATION
Removal Note
1. Remove the right-hand driveaxle shaft.
2. Remove the right-hand axle shaft.
3. Use Impact Slide Hammer SST 49-0223-630B and Converter Seal Remover 307-309 (T94P77001-BH) or equivalent to remove the axle seal.
4. Use Axle Bearing Remover SST 49 UN01 032, Impact Slide Hammer SST 49-0223-630B and Adapter SST 49 UN11 011 to remove the axle tube
bearing.
5. Clean the bearing and seal surfaces of any foreign debris.
Installation Note
1. Use the Axle Bearing/Seal Installer SST 49 UN01 028 and Driver Handle SST 49-F027-003 to replace the RH axle tube bearing.
