B3000 DS Regular Cab 2WD V6-3.0L OHV (2002)
3. Remove the restraints control module (RCM).
1. Slide and disengage the RCM electrical connector locking clip.
2. Release the tab and disconnect the connector from the RCM.
3. Remove the bolts.
4. Remove the RCM.
Installation
WARNING: To reduce the risk of serious personal injury, read and follow all warnings, cautions and notes at the beginning of the removal
procedure.
WARNING: The tightening torque of the air bag restraints control module (RCM) bracket retaining bolts is critical for correct system
operation.
1. Install the RCM.
1. Position the RCM.
2. Install the bolts.
3. Connect the RCM electrical connector.
4. Slide and engage the RCM electrical connector locking tab.
2. Connect the negative battery cable.
3. With the restraint system diagnostic tools installed at all deployable devices, prove out the supplemental restraint system (SRS).
4. Disconnect the negative battery cable and wait at least one minute.
5. Install the utility tray.
1. Position the utility tray.
2. Install the fasteners.
