B3000 SE Cab Plus 4 2WD V6-3.0L OHV (2001)
Exhaust Pipe: Service and Repair
Exhaust Pipe
MUFFLER INLET PIPE REMOVAL / INSTALLATION
1. Raise the vehicle on a hoist.
2. Remove the bolts.
3. Remove the exhaust inlet pipe nuts and gasket.
4. Position the exhaust inlet pipe and install the bolts.
Tightening torque 34 - 46 Nm (3.47 - 4.69 kgf.m, 25 - 33 ft. lbs.)
5. Install a new exhaust inlet pipe gasket and install the nuts.
6. Lower the vehicle.