B3000 SE Cab Plus 4 2WD V6-3.0L OHV (2001)
7. Engage Shaft Seal Remover SST 49 UN01 044 into the inside diameter of the shaft seal.
8. Turn the SST handle clockwise to expand the tool tip inside of the shaft seal.
9. Pull the seal from the A/C compressor.
Installation Note
CAUTION: To prevent refrigerant system contamination, do not allow dirt or other foreign materials to enter the A/C compressor.
1. Clean the compressor nose area.
2. Place the shaft seal on the Shaft Seal Protector SST49 UN01 045. Lubricate the shaft seal and the special tool with refrigerant oil.