B3000 SE Cab Plus 4 2WD V6-3.0L OHV (2001)
6. Disconnect the heater hoses.
1. Using suitable tools, clamp-off the heater hoses.
2. Release the clamps and disconnect the heater hoses.
7. Detach the pin-type retainer and position aside the windshield washer hose.
8. Disconnect the vacuum supply hose near the evaporator core housing.
9. Disconnect the condenser to evaporator line spring lock coupling from the evaporator core inlet.
-
Discard the O-ring seals.
NOTE: The following step is performed at the lower passenger side dash panel, inside the passenger compartment.
10. Disconnect the vacuum hose connector and remove the nut.