B3000 SE Cab Plus 4 2WD V6-3.0L OHV (2001)
10. Install the (2) bolt.
11. Position a new oil pan gasket on the transmission fluid pan.
12. Install and align the oil pan.
-
Loosely install the 18 oil pan bolts.
13. Tighten the oil pan bolts.
-
Use a crisscross sequence to tighten the oil pan bolts.
14. Lower the vehicle.
Note: When the battery has been disconnected and reconnected, some abnormal drive symptoms can occur while the vehicle relearns its adaptive
strategy. The customer needs to be notified that they may experience slightly different upshifts either soft or firm and this is a temporary condition
and will eventually return to normal operating condition.
15. Connect the negative battery cable.
16. Fill the transmission to the proper fluid level and check for proper transmission operation.
-
Use equivalent.