B3000 SE Cab Plus 4 2WD V6-3.0L OHV (2001)
Note: If the original recorded preload is lower than specifications, tighten to the appropriate specifications for used bearings. If the preload is
higher than specification, tighten the nut to the original reading as recorded.
Pinion bearing preload (new pinion bearings)
Tightening torque 1.8 - 3.3 Nm (18.4 - 34 kgf-cm, 16 - 29 inch lbs.)
Pinion bearing preload (used pinion bearings)
Tightening torque 0.9 - 1.5 Nm (9.1 - 15.3 kgf-cm, 8 - 14 inch lbs.)
28. Install the differential case in the rear axle housing.