B3000 SE Cab Plus 4 4WD V6-3.0L OHV (2000)
Cruise Control Servo Cable: Service and Repair
1. Remove the accelerator control splash shield.
2. Remove the cruise control actuator cable bolt (2.5L and 3.0L).
3. Remove the cruise control actuator cable clip (4.0L only).
4. Separate the actuator cable from the throttle body linkage.
5. Remove the cable from the servo.
6. Press the cruise control actuator locking clip inward and twist the actuator counterclockwise.
NOTE: Make sure the seal is present and pressed into position.
7. Remove the cable from the nesting slot.
8. Lock the cable ball slug into the slot located in the servo rotor.
