B3000 SE Cab Plus 4 4WD V6-3.0L OHV (2000)
Fuel Line Coupler: Service and Repair
Push Connect Fittings
WARNING:
-
Do not smoke or carry lighted tobacco or open flame of any type when working on or near any fuel-related component. Highly flammable
mixtures are always present and may be ignited, resulting in possible personal injury.
-
Fuel in the fuel system remains under high pressure even when the engine is not running. Before repairing or disconnecting any of the
fuel lines or fuel system components, the fuel system pressure must be relieved to prevent accidental spraying of fuel, causing personal
injury or a fire hazard.
1. Relieve the fuel pressure.
2. Disconnect the safety clip from the male hose.
3. Separate the fittings.
Connect:
1. Align the tube to the fitting and push until you hear a click.
2. Pull on the fitting to make sure it is fully engaged, then install the safety clip.
