B3000 SE Cab Plus 4 4WD V6-3.0L OHV (2000)
Throttle Cable/Linkage: Service and Repair
ACCELERATOR CABLE BRACKET
1. Remove the accelerator control splash shield.
2. Disconnect the accelerator cable from the throttle lever.
3. Depress the tabs and remove the accelerator cable from the accelerator cable bracket.
4. Disconnect the accelerator cable from the accelerator pedal and shaft.
5. Depress the clips and remove the accelerator cable from the accelerator pedal and shaft.
6. Install in reverse order of removal.
ACCELERATOR CABLE BRACKET REMOVAL/INSTALLATION
1. Remove the accelerator control splash shield.
