B3000 SE Cab Plus 4 4WD V6-3.0L OHV (2000)
7. Press the transmission case (16 pin) electrical connector through the case until a click is heard.
8. Install the TSS sensor wire.
1. Install the TSS sensor wire into (16 pin) electrical connector.
2. Install the TSS sensor wire into locator.
Caution Do not overstretch the retaining spring.
9. Install the transmission case (16 pin) electrical connector retaining spring.
10. Install the EPC, CCS/SS4 and SS2 solenoids.
Caution The solenoid clamp must be installed in the TCC and EPC solenoid grooves, shift solenoid pockets and the No. 204 plug.
11. Install the solenoid clamp.
1. Position the solenoid clamp on the main control valve body.
2. Install the solenoid clamp bolts.