B3000 SE Cab Plus 4 4WD V6-3.0L OHV (2000)
Differential Mount: Service and Repair
Front Axle Retainer
FRONT AXLE RETAINER REMOVAL/INSTALLATION
1. Raise the vehicle on a hoist.
2. Remove the bushing through-bolt.
3. Remove the three retainer bracket bolts.
4. Install in reverse order of removal.
Tightening torque: Retainer Bracket Bolts
64 - 91 Nm (6.5 - 9.3 kgf.m, 47 - 67 ft. lbs.)
Tightening torque: Bushing Through Bolt
60 - 80 Nm (6.1 - 8.2 kgf.m, 45 - 59 ft. lbs.)