Recall: Cruise Control Switch Overheating - 2002 B3000 SE Regular Cab 2WD
C. REPAIR PROCEDURE
INSPECTION PROCEDURE
1. Disconnect the harness connector (B) from the CCDS (A).
2. Inspect the harness connector (B) for the presence of brake fluid.
- If brake fluid IS NOT present, install Universal Fused Jumper Harness. See PROCEDURE 1.
- If brake fluid IS present, replace CCDS. See PROCEDURE 2.
Procedure 1 - For Vehicles With Non-Leaking Switches
PROCEDURE 1 - For vehicles with non-leaking switches
UNIVERSAL FUSED JUMPER HARNESS INSTALLATION