B3000 SE Regular Cab 2WD V6-3.0L OHV (2002)
Muffler: Service and Repair
Muffler Inlet Pipe
MUFFLER INLET PIPE REMOVAL/INSTALLATION
1. Raise the vehicle on a hoist. See LIFTING.
2. Remove the bolts.
3. Remove the exhaust inlet pipe nuts and gasket.
4. Position the exhaust inlet pipe and install the bolts.
Tightening torque
34 - 46 N.m (3.47 - 4.69 kgf.m, 25 - 33 ft.lbf)
5. Install a new exhaust inlet pipe gasket and install the nuts.
6. Lower the vehicle.