B3000 SE Regular Cab 4WD V6-3.0L OHV (1998)
Front Fender: Service and Repair
Removal Note
1. Remove the front bumper
2. Remove the parking lamp assembly.
3. Remove the radiator opening cover.
1. Remove the pushpins.
2. Remove the radiator opening cover.
4. Remove the stone deflector.
1. Remove the pushpin.
2. Remove the stone deflector.
5. If equipped, remove the mud flap.
CAUTION:
^
Remove the electrical connector locators from the splash shield prior to removal.
^
On the RH splash shield, disconnect the vacuum lines from the vacuum storage reservoir.
6. Remove the splash shield.
1. Remove the screws.
2. Remove the pushpin.
3. Remove the bolts.
4. Remove the splash shield.
7. Remove the front fender cowl side sound absorber.