B3000 SE Regular Cab 4WD V6-3.0L OHV (1998)
Hydraulic Control Assembly - Antilock Brakes: Service and Repair
4WABS Hydraulic Unit
REMOVAL / INSTALLATION
1. Disconnect the negative battery cable.
2. Disconnect the electrical connector by lifting up on the release tab.
3. Remove in order shown in image.
1) Brake Lines
2) Nuts
Tighten torque: 7 - 9 Nm (63 - 79 inch lbs.)
3) Hydraulic Unit
4. Install in reverse order of removal.
5. Bleed the brake system.
