B3000 SE Regular Cab 4WD V6-3.0L OHV (1998)
Fan Blade: Service and Repair
REMOVAL AND INSTALLATION
1. Remove in order shown in figure.
Removal Note
-
The nut which attaches the clutch to the water pump shaft has a left-hand thread and must be rotated clockwise for removal.
Installation Note
-
The nut which attaches the clutch to the water pump shaft has a left-hand thread and must be rotated counterclockwise for installation.
2. Install in reverse order of removal.
Tightening Torque: 6 - 8 Nm (54 - 70 inch lbs.)